Construction

1926.602 Material handling equipment (d) Powered industrial truck operator training Note: The requirements applicable to construction work under this paragraph are identical to those set forth at 1910.178(l) of this chapter. 1910.178 Powered industrial trucks (l) Operator training (1) Safe operation. (i) The employer shall

1926.503 Training requirements The following training provisions supplement and clarify the requirements of 1926.21 regarding the hazards addressed in subpart M of this part. (a) Training Program. (1) The employer shall provide a training program for each employee who might be exposed to fall hazards.

1926.450 Scope, application and definitions applicable to this subpart (a) Definitions. Qualified means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his/her ability to solve or resolve problems related to

1926.416 General requirements (a) Protection of employees (3) Before work is begun the employer shall ascertain by inquiry or direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, is so located that the performance of the work

1926.350 Gas welding and cutting (a) Transporting, moving and storing compressed gas cylinders (12)The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tank cars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965.

1926.300 General requirements (c) Personal protective equipment. Employees using hand and power tools and exposed to the hazard of falling, flying, abrasive, and splashing objects, or exposed to harmful dusts, fumes, mists, vapors, or gases shall be provided with the particular personal protective equipment necessary

1926.200 Accident prevention signs and tags (g) Traffic signs (1) Construction areas shall be posted with legible traffic signs at points of hazard. (2) All traffic controls signs or devices used for protection of construction workers shall conform to Part VI of the Manual of

1926.150 Fire protection (a) General requirements. (1) The employer shall be responsible for the development of a fire protection program to be followed throughout all phases of the construction and demolition work, and he shall provide for the firefighting equipment as specified in this subpart.

1926.102 Eye and face protection (a) General (2) Eye and face protection equipment required by this Part shall meet the requirements specified in American National Standards Institute, Z87.1-1968, Practice for Occupational and Educational Eye and Face Protection. [SEE: ANSI Z87.1 – 1968 Section 4.9 “When

1926.50 Medical services and first aid (c) In the absence of an infirmary, clinic, hospital, or physician, that is reasonably accessible in terms of time and distance to the worksite, which is available for the treatment of injured employees, a person who has a valid

1926.20 General safety and health provisions (b) Accident prevention responsibilities (1) It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part. (2) Such programs [as may be necessary to comply with this

1910.12 Construction work (a) Standards. The standards prescribed in part 1926 of this chapter are adopted as occupational safety and health standards under section 6 of the Act [OSH Act]. According to the provisions thereof, they shall apply to every employment and place of employment