1910.95 Occupational noise exposure (i) Hearing protectors (4) The employer shall provide training in the use and care of all hearing protectors provided to employees. (k) Training program (1) The employer shall institute a training program for all employees who are exposed to noise at
1910.66 Powered platforms for building maintenance (i) Operations (1) Training. (i) Working platforms shall be operated only by persons who are proficient in the operation, safe use and inspection of the particular working platform to be operated. (ii) All employees who operate working platforms shall
1910.38 Emergency action plans (a) Application. An employer must have an emergency action plan whenever an OSHA standard in this part requires one. The requirements in this section apply to each such emergency action plan. (b) Written and oral emergency action plans. An emergency action
1926.602 Material handling equipment (d) Powered industrial truck operator training Note: The requirements applicable to construction work under this paragraph are identical to those set forth at 1910.178(l) of this chapter. 1910.178 Powered industrial trucks (l) Operator training (1) Safe operation. (i) The employer shall
1926.503 Training requirements The following training provisions supplement and clarify the requirements of 1926.21 regarding the hazards addressed in subpart M of this part. (a) Training Program. (1) The employer shall provide a training program for each employee who might be exposed to fall hazards.
1926.450 Scope, application and definitions applicable to this subpart (a) Definitions. Qualified means one who, by possession of a recognized degree, certificate, or professional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated his/her ability to solve or resolve problems related to
1926.416 General requirements (a) Protection of employees (3) Before work is begun the employer shall ascertain by inquiry or direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, is so located that the performance of the work
1926.350 Gas welding and cutting (a) Transporting, moving and storing compressed gas cylinders (12)The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tank cars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965.
1926.300 General requirements (c) Personal protective equipment. Employees using hand and power tools and exposed to the hazard of falling, flying, abrasive, and splashing objects, or exposed to harmful dusts, fumes, mists, vapors, or gases shall be provided with the particular personal protective equipment necessary
1926.200 Accident prevention signs and tags (g) Traffic signs (1) Construction areas shall be posted with legible traffic signs at points of hazard. (2) All traffic controls signs or devices used for protection of construction workers shall conform to Part VI of the Manual of